300Tdi Defender
WIPERS AND WASHERS
7
REPAIR
Refit
NOTE: During reassembly all fixings
related to wiper motor and wheelboxes are
finger tightened only, until all components
are correctly aligned.
12. Fit wheelboxes to bulkhead and secure with
retaining nuts and washers.
13. Fit drive rack tubes to wheelboxes.
14. Apply grease to drive rack and wheelboxes.
15. Align wiper motor and mounting pad, secure with
retaining strap and tighten drive tube nut.
16. Fully tighten wheelbox back plate nuts.
17. Fully tighten both wheelbox spindle nuts.
18. Fit wiper arm adaptors and secure with grub
screw.
19. Before refitting panels fit wiper blades, connect
multi-plug and earth lead, reconnect battery and
check wiper operation.
20. If satisfactory, secure steering column upper and
lower fixings and tighten to correct torque.
21. Fit ventilator grille panel, fascia crash pad,
instrument housing and all other components
removed to gain access to wiper motor and
wheelboxes.
