Defender 110 (LD) V8-3.9L (1993)
Heated Glass Element Switch: Service and Repair
Switch Panel - Rear Door Services
Service Repair No - 86.65.78
Remove
1. Release screw caps from top fixings and remove screws. Pry out 2 trim studs securing bottom of switch panel to fascia.
2. Withdraw switch panel and disconnect multi-plugs from switches and module.
3. Pull harness multi-plugs through aperture in base of panel.
Refit
4. Feed harness into switch panel and reconnect multi-plugs.
5. Position switch panel on fascia and secure with screws and trim studs.