Defender 90 (LD) V8-4.0L (1997)
Wiring Harness HVAC: Service and Repair
Wiring Harness - Supplementary Replacement
Remove
1. Remove evaporator core. See: Evaporator Core/Service and Repair
2. Remove nut and release earth eyelet from fender.
3. Disconnect multiplug from compressor fly-lead.
4. Remove 4 ties securing harness to air conditioning hoses.
5. Remove tie securing harness to engine harness.
6. Above chassis front crossmember, disconnect multiplug from condenser fan fly-lead.
7. Disconnect multiplug from trinary switch.
8. Release ties securing harness to pipes.
9. Remove 4 screws securing fusebox cover to centre console.
10. Remove cover.