Defender 90 (LD) V8-4.0L (1997)
The ground distribution comprises a number of 'Headers and Splices' tables. These are used in a similar manner to those in Power Distribution; to narrow
the search area by checking for fault symptoms in associated circuits.
Ground Points
Ground Points
Ground points are identified with an eyelet symbol and a connector number, except where components are grounded through their fixings, when only the
eyelet is shown.
Headers and Splices
Header and splice tables present the joint(s) and wiring up to the first component. Splices are identified by a number with an alphabetical prefix. This
identification is shown in the heading of each table.
Line Types
Line Types
The 'cup and ball' symbol indicates the male and female halves of the connector.
A. Plug on lead (flylead), wired directly to the component.
B. Connector plugs directly into circuit.
Power Distribution
The Power Distribution diagram shows the connections from the battery to the engine and passenger compartment fuseboxes. It also shows the internal
circuitry of the fuseboxes.
These fusebox details are outlining the way in which internal harness splices and header joints distribute power in the harnesses. This information should