Cruise control inoperative - vacuum hose
- Make
- Land Rover
- Model
- Discovery II Technical Bulletins
- Section
- Cruise control inoperative - vacuum hose › Cruise control inoperative - vacuum hose
CRUISE CONTROL INOPERATIVE - VACUUM HOSE
- Model
- New Discovery
- Affected vehicles
- All V8 petrol derivatives with Cruise Control prior to VIN XA 900000 (System 1) XA 203115 (System 2)
- Date
- 1999-01-20
- Reference
- Bulletin 0011, CDS ref L8491bu
Bulletin text
New Discovery
AFFECTED RANGE:
All V8 petrol derivatives with Cruise Control prior to VIN XA 900000 (System 1)
PROBLEM:
CRUISE CONTROL INOPERATIVE - VACUUM HOSE The customer complains that the cruise control does not operate when requested.
CAUSE:
The vacuum hose between the cruise control actuator and the vacuum pump is poorly routed and kinked or flattened as a result.
ACTION:
Examine the vacuum hoses on the cruise control assembly, (arrowed in illustration).
If there is any evidence of kinking flattening, remove the hose and refit so that it is free from kinks or flattening.
PARTS INFORMATION:
Not applicable
WARRANTY CLAIMS: Use Complaint Code: 2W3S
Use S.R.O.: 19.75.08 Time allowance: 0.10Hrs
Bulletin N o : 0011 L8491bu 1 20.01.99
XA 203115 (System 2)
or
Parts & tools for this job For Land Rover Discovery
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.