Gearbox rattle-clutch plate-new part introduction
- Make
- Land Rover
- Model
- Discovery II Technical Bulletins
- Section
- Gearbox rattle-clutch plate-new part introduction › Gearbox rattle-clutch plate-new part introduction
GEARBOX RATTLE-CLUTCH PLATE-NEW PART INTRODUCTION
- Model
- Discovery 2.0 Mpi
- Affected vehicles
- All 2.0 Mpi derivatives from VIN LJ 070993
- Date
- 1994-01-07
- Reference
- 07/01/94
Bulletin text
SUBJECT Gearbox Rattle - Clutch Plate - New Part Information
MODEL AFFECTED VEHICLES
Discovery 2.0 Mpi All 2.0 Mpi derivatives from VIN LJ 070993
DETAIL
To overcome customer concern of clutch/gearbox rattle when driving in either first, second or reverse gears, a new clutch plate has been introduced which eliminates rattle.
This new part is applicable to 2.0 Mpi only.
Thorough diagnosis must be carried out to establish the exact nature of the rattle prior to changing a clutch plate.
The new part is directly interchangeable with the previous part.
ACTION REQUIRED
On customer complaint of excessive transmission rattle change clutch plate.
PARTS INFORMATION
FTC 4034 Clutch drive plate replaces FTC 3317.
PROCEDURE
Refer to section 33 and 37 of the workshop manual for clutch and gearbox removal instructions.
07/01/94
33/01/94/EN
WARRANTY
Normal warranty policy and procedures apply.
COMP. CODE
3A2K
SRO
33.10.01 Clutch assembly renew - 04.50 hours
Parts & tools for this job For Land Rover Discovery
- PARTClutch kitSearch: Land Rover Discovery clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Land Rover Discovery manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.