Discovery II
BRAKES
REPAIRS
70-41
Refit
1. Clean components with brake cleaning fluid.
WARNING: Do not use compressed air to
clean brake components. Dust from friction
materials can be harmful if inhaled.
2. Lubricate cable lever pivot pin.
3. Fit pivot pin to shoe, fit cable lever washers and
secure with 'C' clip.
4. Fit adjuster plungers.
5. Fit shoe to brake cable, align to back plate and
adjuster. Secure shoe to back plate with pin,
spring and washer.
6. Fit abutment plate to brake shoe.
7. Fit return springs with remaining shoe. Secure
shoe to back plate with pin, spring and washer.
8. Fit abutment plate retaining spring.
9. Clean brake drum and mating face.
10. Position brake drum and tighten retaining
screw.
11. Fit rear propeller shaft.
12. Adjust handbrake.