Discovery II
COOLING SYSTEM - V8
REPAIRS 26-2-19
Gasket - coolant pump
$% 26.50.02
Remove
1. Remove auxiliary drive belt.
REPAIRS, Belt - auxiliary drive.
2. Drain cooling system.
ADJUSTMENTS, Drain and refill.
3. Remove 3 bolts securing pulley to coolant
pump and remove pulley.
4. Release clip and disconnect feed hose from
coolant pump.
5. Remove 9 bolts securing coolant pump,
remove pump and discard gasket.
Refit
1. Clean coolant pump and mating face.
2. Fit new gasket and coolant pump to cylinder
block. Fit bolts and tighten to 24 Nm (18 lbf.ft).
3. Connect feed hose to coolant pump and secure
with clip.
4. Ensure mating faces of coolant pump pulley
and flange are clean. Fit pulley and tighten
bolts to 22 Nm (16 lbf.ft).
5. Fit auxiliary drive belt.
REPAIRS, Belt - auxiliary drive.
6. Refill cooling system.