Discovery II
DOORS
REPAIRS 76-1-13
Latch and motor - tail door
$% 76.37.16
Remove
1. Remove tail door trim casing.
DOORS, REPAIRS, Trim casing - tail
2. Carefully release water shedder from tail door.
3. Release and remove control rod from exterior
handle and latch.
4. Release and remove sill button lock rod.
5. Disconnect multiplug from motor.
6. Remove release cable from clip.
7. Remove 3 Torx screws securing latch and
motor assembly to door.
8. Remove door latch.
9. Disconnect release cable from latch.
Refit
1. Connect release cable to latch.
2. Position door latch and motor assembly, secure
with Torx screws and tighten to 7 Nm (5.2 lbf.ft).
3. Position control rod and connect to exterior
handle and latch.
4. Position sill button lock rod and connect to
latch.
5. Secure release cable in clip.
6. Connect multiplug to motor.
7. Fit water shedder to door.
8. Fit tail door trim casing.
DOORS, REPAIRS, Trim casing - tail
Handle - exterior - rear door
$% 76.58.02
Remove
1. Remove rear door trim casing.
2. Carefully release water shedder from door.
3. Release control rod from latch.
4. Remove Torx bolt securing exterior handle to
door.
5. Remove exterior handle.
6. Remove control rod from exterior handle.
Refit
1. Fit control rod to exterior handle.
2. Position exterior handle and secure to door with
Torx bolt.
3. Connect control rod to latch.
4. Fit water shedder to door.
5. Fit rear door trim casing.