Discovery II
EMISSION CONTROL - V8
17-2-52 REPAIRS
Canister - EVAP - Models with Fuel Leak
Detection Pump - up to 03MY
$% 17.15.13
Remove
1. Raise vehicle on lift.
2. Remove 3 Torx screws securing fuel leak
detection pump to mounting bracket.
3. Remove 3 bolts securing EVAP canister
mounting bracket to chassis longitudinal.
4. Remove 2 bolts securing EVAP canister to
mounting bracket and collect clamp.
5. Remove mounting bracket.
6. Position cloth to absorb any fuel spillage.
7. Release purge and tank vent pipes from EVAP
canister.
8. Remove clip securing fuel leak detection pump
pipe to EVAP canister.
9. Release pipe from EVAP canister and remove
canister.
CAUTION: Plug the connections.
Refit
1. Remove plugs and ensure all connections are
clean.
2. Connect fuel leak detection pump pipe to EVAP
canister and secure with clip.
3. Connect purge and tank vent pipes to EVAP
canister.
4. Position mounting bracket to EVAP canister
and secure with bolts.
5. Position mounting bracket to chassis
longitudinal and tighten bolts.
6. Fit Torx screws securing fuel leak detection
pump to mounting bracket.
7. Lower vehicle.
M17 0219
2
M17 0220
M17 0221
4
4
4
9
7
7
5
8
