Discovery II
REAR SUSPENSION
64-42
REPAIRS
8. Use LRT-60-009 to remove nut securing
actuator push rod to long arm.
9. Remove nut and bolt securing actuator to short
arm and remove actuator.
10. Restrain torsion bar and remove long arm
securing bolt and washer. Remove long arm
from torsion bar.
CAUTION: The short arm and torsion bar
are supplied as an assembly and must not
be separated.
11. Use a suitable drift to remove both halves of
slipper bush from long arm.
12. Use suitable adaptors to press actuator rod end
bush from long arm.