Discovery II
TRANSFER BOX - LT230SE
REPAIRS
41-31
21. 03 Model Year onwards - if fitted: Release
and disconnect both differential lock warning
lamp switch multiplugs from main harness.
22. Remove 4 bolts from transfer box bottom plate,
position support plate LRT-99-010 to transfer
box and tighten bolts.
23. Position gearbox support jack and secure
support plate to jack using 4 bolts.
24. Remove 3 bolts securing transfer box to
gearbox.
25. Fit 3 guide studs LRT-41-009 through transfer
box bolt holes to support it during removal.
26. Remove 2 bolts and nut securing transfer box
to gearbox case.
CAUTION: If securing stud is removed
during this operation, it must be discarded
and a new stud fitted.
27. Position a jack to support gearbox and engine.
28. Remove 4 bolts and nut securing RH mounting
to body and transfer box.
29. Remove nut securing LH mounting to body.
30. Raise gearbox and remove RH mounting.
31. With assistance, remove transfer box from
gearbox.
32. Remove input shaft oil seal.
