Passenger seat belt stalk rattle
- Make
- Land Rover
- Model
- Discovery Technical Bulletins
- Section
- Passenger seat belt stalk rattle › Passenger seat belt stalk rattle
PASSENGER SEAT BELT STALK RATTLE
- Model
- Discovery
- Affected vehicles
- 081991 to 116079
- Date
- 1995-01-18
- Reference
- 18/01/95
Bulletin text
Passenger Seat Belt Stalk Rattle
MODEL
Discovery
DETAIL
To overcome any issues that may arise concerning seat belt stalks rattling against the centre console, a foam pad can be fitted to the side of the rear heater duct underneath the console, this operation can be carried out without the need to remove any parts.
Note: This rattle can normally be heard when the front passenger seat is vacant.
ACTION REQUIRED
Upon customer complaint, follow the procedure identified below
PARTS INFORMATION
MXC 5713 Foam pad
PROCEDURE
1) Remove backing from the foam pad. 2) Carefully prise the forward edge of the rear of the console outwards and insert the foam pad between the console and the rear heater duct. 3) Insure foam pad is in line with seat belt stalk. 4) Fit pad with adhesive side to heater duct.
18/01/95
76/03/95/EN
AFFECTED VEHICLES
LP LH LJ 081991 to 116079 LD
WARRANTY
Normal warranty policy and procedures apply.
COMP. CODE
8P2W
SRO
76.73.89/26 Fit foam pad 00.10 hours.
Parts & tools for this job For Land Rover Discovery
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.