Workshop Manuals Factory service & repair Land Rover
01 General and service information02 Engine03 Fuel, emissions and engine management04 Cooling system05 Manifolds and exhaust06 Transmission and axles07 Steering and suspension08 Brakes09 Wheels and tyres10 Body, trim and restraints11 Heating and air conditioning12 Electrical and instruments13 Service and recall actions
Land Rover Discovery Technical Bulletins10 · Body, trim and restraints
10 · Body & interior

Rear bumper fixing bolts loose

Make
Land Rover
Model
Discovery Technical Bulletins
Section
Rear bumper fixing bolts loose › Rear bumper fixing bolts loose
Body, trim and restraintsRear bumper fixing bolts loose

REAR BUMPER FIXING BOLTS LOOSE

Model
Discovery
Affected vehicles
126980 to 132088
Date
1995-01-25
Reference
25/01/95
Rear Bumper Fixing Bolts Loose – bulletin page 1

Bulletin text

Rear Bumper Fixing Bolts Loose

MODEL

Discovery

DETAIL

It as been noted that a small number of vehicles within the above Vin range, may have had the rear bumper fixing bolts incorrectly torqued. In some instances the rear fixing bolts may have a torque setting of 27 Nm, the correct setting for these fixing bolts is 40-50 Nm.

ACTION REQUIRED

Upon pre-delivery inspection or at the earliest opportunity check the rear bumper fixing bolts, and retorque where necessary.

PARTS INFORMATION

Not applicable

PROCEDURE

Any vehicles within the above Vin range will require the rear bumper fixing bolts to be checked, and retorqued were necessary.

Rear fixing bolt torque setting 40-50Nm.

25/01/95

76/05/95/EN

AFFECTED VEHICLES

LP LH LJ 126980 to 132088 LD

WARRANTY

Normal policy and procedures apply

COMP. CODE

9R8G

SRO

76.22.89/28 Check and retorque rear bumper fixings 00.15 hours.

Parts & tools for this job For Land Rover Discovery

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.