Windscreen leaks/windnoise
- Make
- Land Rover
- Model
- Discovery Technical Bulletins
- Section
- Windscreen leaks/windnoise › Windscreen leaks/windnoise
WINDSCREEN LEAKS/WINDNOISE
- Model
- Range Rover Discovery
- Affected vehicles
- All Range Rover derivatives from LH 647645 All Discovery derivatives from LJ 081991
- Date
- 1994-04-20
- Reference
- 20/04/94
Bulletin text
Windscreen Water Leaks/Windnoise
MODEL AFFECTED VEHICLES
Range Rover All Range Rover derivatives from LH 647645 Discovery All Discovery derivatives from LJ 081991
DETAIL
In instances where a leak or windnoise is identified from the front windscreen the procedure below should be followed.
It is not necessary to remove the windscreen when addressing these concerns.
ACTION REQUIRED
Upon customer complaint locally repair the area of concern. Please provide full vehicle details on a Product Report identifying the area of concern.
PARTS INFORMATION
BHM 705L Bonding kit
The kit contains primer and cleaner and a tube of adhesive.
Should additional adhesive be required refer to Bulletin 01/10/94 which details supplier address information.
PROCEDURE
Identify the point of leak, it may be necessary to apply a low pressure air line to the area of concern to establish the leak path.
Remove the interior trim as necessary in the area of the leak.
Clean and degrease the area to be sealed.
20/04/94
76/12/94/EN
WARRANTY
Normal warranty policy and procedures apply.
COMP. CODE
9H6N
SRO
Refer to individual Service Repair Operation numbers depending upon the nature of the repair being undertaken.
Parts & tools for this job For Land Rover Discovery
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.