Cylinder head gasket - new part introduction
- Make
- Land Rover
- Model
- Discovery Technical Bulletins
- Section
- Cylinder head gasket - new part introduction › Cylinder head gasket - new part introduction
CYLINDER HEAD GASKET - NEW PART INTRODUCTION
- Model
- Discovery 300 Tdi Derivatives Discovery 300 Tdi Derivatives Defender 300 Tdi Derivatives
- Affected vehicles
- 557561 Onwards 723517 Onwards 114314 Onwards
- Date
- 1997-04-15
- Reference
- 15/04/97
Bulletin text
Cylinder Head Gasket - New Part Introduction
MODEL
Discovery 300 Tdi Derivatives Discovery 300 Tdi Derivatives Defender 300 Tdi Derivatives
DETAIL
Due to a manufacturing tolerance issue, it has been necessary to introduce a further cylinder head gasket into production from the above Vin numbers, additional to the current 1-2-3 hole gasket.
Note: These new gaskets do not have identification holes as with the current gaskets.
ACTION REQUIRED
Information only
PARTS INFORMATION
ERR 7154 new cylinder head gasket
PROCEDURE
Refer to the workshop manual section 12
When carrying out an engine repair and it is necessary to replace the cylinder head gasket, if the gasket does not have an identification hole in the position shown on the illustration opposite, gasket ERR 7154 MUST be fitted.
© Rover Group 1996
15/04/97
12/03/97/EN
AFFECTED VEHICLES
LP LJ 557561 Onwards LJ 723517 Onwards LD 114314 Onwards
WARRANTY
Not applicable
COMP. CODE
Not applicable
SRO
Not applicable
Parts & tools for this job For Land Rover Discovery
- PARTEngine gasket setSearch: Land Rover Discovery engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.