300Tdi Discovery
4.0 V8
13
REPAIR
CRANKSHAFT REAR OIL SEAL
Service repair no - 12.21.20
Remove
1. Manual vehicles: Remove flywheel.
See
ENGINE 3.9 V8, Repair, Flywheel
2. Automatic vehicles: Remove drive plate.
See
ENGINE 4.0 V8, Repair, Drive Plate -
Automatic
3. Remove oil seal from location.
CAUTION: Do not damage seal location or
running surface on crankshaft.
Refit
4. Ensure both seal location and running surface
on crankshaft are clean.
5. Ensure mating faces of flywheel and crankshaft
are clean.
6. Lubricate seal guide LRT-12-095 with clean
engine oil. Position over crankshaft boss.
7. Lubricate oil seal lip.
8. Position seal squarely. Remove guide.
9. Drift seal into location using LRT-12-091.
10. Manual vehicles: Fit flywheel.
See ENGINE 3.9
V8, Repair, Flywheel
11. Automatic vehicles: Fit drive plate.
See
ENGINE 4.0 V8, Repair, Drive Plate -
Automatic
