300Tdi Discovery
Tdi
1
SPECIFICATIONS, TORQUE
TORQUE VALUES
NOTE: Torque wrenches should be regularly checked for accuracy to ensure that all fixings are
tightened to the correct torque.
Nm
Engine block
Bearing cap
133
...............................................................................................
Blanking plug, oil gallery, rear
37
....................................................................
Oil squirt jet assembly
17
................................................................................
Drain plug, cylinder block
25
...........................................................................
Oil squirt jet, vacuum pump cam
7
.................................................................
Connecting rod to cap
59
................................................................................
Oil pick up assembly to bearing cap
9
...........................................................
Oil pick up assembly to front cover
25
............................................................
Camshaft thrust plate
9
..................................................................................
Oil drain pipe to block (internal)
25
.................................................................
Oil drain pipe to block (external)
25
................................................................
Sump to cylinder block and front cover
25
......................................................
Drain plug, oil sump
35
...................................................................................
Tappet guide
14
..............................................................................................
Breather side cover assembly
25
....................................................................
Baffle plate to breather side cover
4
..............................................................
Vacuum pump
25
............................................................................................
Fuel lift pump
25
.............................................................................................
Flywheel housing
45
.......................................................................................
Flywheel housing clutch cover stud
10
...........................................................
Plug, flywheel housing
12
...............................................................................
Rear oil seal assembly
25
...............................................................................
Oil filter adaptor
45
..........................................................................................
Waxstat adaptor to oil filter adaptor
9
............................................................
Oil pressure switch
17
.....................................................................................
Oil filter, spin on
13
.........................................................................................
Oil cooler unions to filter adaptor
45
...............................................................
Oil level tube
25
..............................................................................................
Engine mounting foot to cylinder block
85
......................................................
Engine mounting foot to flywheel housing
45
.................................................
Engine mounting foot rubber to mounting foot (bolt and nut)
85
.....................
Flywheel to crankshaft
146
..............................................................................
Clutch cover plate to flywheel
34
....................................................................
Flex drive plate to crankshaft (auto)
146
..........................................................
Flex drive plate to ring gear (auto)
25
.............................................................
Flex drive plate to torque converter (auto)
45
.................................................
