300Tdi Discovery
17
EMISSION CONTROL
8
REPAIR
ADD: 09/95
EVAP CANISTER - ADVANCED EVAPS
Service repair no - 17.15.13
Remove
1. Disconnect battery negative lead.
2. Release clip securing vent solenoid hose to
canister and disconnect hose.
3. Release vent and purge line quickfit connections
from canister.
4. Remove nut and bolt securing canister to
mounting bracket, collect fixture clamp.
5. Remove canister.
Refit
6. Fit canister to mounting bracket.
7. Position fixture clamp and secure canister to
mounting bracket with nut and bolt.
8. Connect vent and purge line quickfit connections
to canister.
9. Connect vent solenoid hose to canister and
secure with clip.
10. Reconnect battery negative lead.
EVAP CANISTER PURGE VALVE - ADVANCED
EVAPS
Service repair no - 17.15.39
Remove
1. Disconnect battery negative lead.
2. Disconnect multiplug from purge valve.
3. Release purge valve rubber mounting from
bracket.
4. Release quickfit hose connections from throttle
body plenum and EVAP canister.
5. Remove purge valve assembly.
Refit
6. Locate purge valve adjacent to bracket.
7. Connect quickfit hose connections to throttle
body plenum and EVAP canister.
8. Conmnect multiplug to purge valve and secure
purge valve rubber mounting to bracket.
9. Reconnect battery negative lead.