300Tdi Discovery
CRUISE CONTROL
1
REPAIR
BRAKE AND CLUTCH PEDAL SWITCHES/VENT
VALVES
Service repair no - 19.75.34 - Clutch Switch
Service repair no - 19.75.35 - Brake Switch
Remove
1. Remove 3 studs securing driver’s side fascia
closing panel.
2. Release and move closing panel aside.
3. Locate and release locking sleeve.
4. Release switch/vent valve from pedal bracket.
5. Disconnect vacuum hose and harness connector
from switch.
6. Remove switch.
Refit
7. Reverse removal procedure.
NOTE: Ensure locking sleeve is correctly
positioned.