300Tdi Discovery
MFI
1
SPECIFICATIONS, TORQUE
TORQUE VALUES
NOTE: Torque wrenches should be regularly checked for accuracy to ensure that all fixings are
tightened to the correct torque.
Nm
Air-Bypass valve (stepper motor)
20
...............................................................
All flexible hose securing clamps
1,3
...............................................................
Fuel feed pipe - hose to fuel rail
22
.................................................................
Fuel filter
31
....................................................................................................
EVAPORATIVE LOSS CONTROL SYSTEM
All flexible hose securing clamps
1,7
...............................................................
METRIC
Nm
M5
6
...........................................................................
M6
9
...........................................................................
M8
25
...........................................................................
M10
45
.........................................................................
M12
90
.........................................................................
M14
105
.........................................................................
M16
180
.........................................................................
UNC / UNF
1/4
9
...........................................................................
5/16
24
.........................................................................
3/8
39
...........................................................................
7/16
78
.........................................................................
1/2
90
...........................................................................
5/8
136
...........................................................................
NOTE: Torque values above are for all screws and bolts used except for those specified.
