300Tdi Discovery
SFI
7
REPAIR
FUEL TEMPERATURE SENSOR
Service repair no - 19.22.08
Remove
NOTE: Because fuel leakage will not occur
when sensor is removed, it is not
necessary to depressurise the fuel system
for this operation.
1. Disconnect battery negative lead.
2. Disconnect multiplug from fuel temperature
sensor.
3. Remove sensor from fuel rail.
Refit
4. Ensure sensor and location in fuel rail are clean.
5. Fit sensor. Tighten to
17 Nm.
6. Connect multiplug.
7. Reconnect battery negative lead.
