300Tdi Discovery
SFI
9
REPAIR
INTAKE AIR TEMPERATURE SENSOR (IAT
SENSOR)
Service repair no - 18.30.09
Remove
1. Disconnect multiplug from IAT sensor.
2. Remove IAT sensor from air cleaner.
Refit
3. Clean sensor and mating face.
4. Fit IAT sensor. Tighten to
8 Nm.
5. Connect multiplug.
THROTTLE POSITION SENSOR (TP SENSOR)
Service repair no - 19.22.49
Remove
1. Disconnect multiplug from TP sensor.
2. Remove 2 Torx screws securing TP sensor.
Collect clamp plate.
3. Remove TP sensor.
Refit
4. Clean mating faces.
5. Fit TP sensor. Ensure drive engages correctly
with throttle spindle.
6. Position clamp plate. Secure TP sensor with
Torx screws. Tighten to
2 Nm.
7. Connect multiplug.