300Tdi Discovery
MANIFOLD AND EXHAUST SYSTEM
9
REPAIR
MANIFOLD CHAMBER GASKET - Mpi
Service repair no - 30.15.37
Remove
1. Disconnect battery negative lead.
2. Position absorbent cloth around fuel pipe to fuel
rail union. Loosen union to relieve pressure.
Re-tighten union.
3. Release clip and remove air cleaner to throttle
housing hose.
4. Disconnect stepper motor and throttle
potentiometer multiplugs.
5. Release clip and disconnect breather hose from
throttle housing.
6. Release throttle cable from abutment bracket.
7. Release throttle cable from cam. Remove
coolant bypass hose from throttle housing.
8. Disconnect fuel temperature sensor multiplug.
9. Release clip and disconnect brake servo hose
from manifold.