300Tdi Discovery
ZF
5
REPAIR
Remove
1. Select low range with transfer gear lever.
2. Remove knob and gaiter from transfer gear
lever.
3. Disconnect battery terminals.
4. Remove insulation pad from rocker cover and
inlet manifold.
5. On LH drive vehicles only, disconnect multi-plug
from top of brake fluid reservoir.
6. Release electrical harness from clips along top
of bulkhead and pull over to one side.
7. Remove bolt securing transfer and main gearbox
breather pipe clip to rear of cylinder head.
8. Disconnect kick down cable at fuel injection
pump.
9. Drain coolant from cooling system.
10. Disconnect top hose from radiator.
11. Disconnect turbo charger hose from inter-cooler.
12. Remove starter heat shield.
