300Tdi Discovery
FRONT SUSPENSION
1
SPECIFICATIONS, TORQUE
TORQUE VALUES
NOTE: Torque wrenches should be regularly checked for accuracy to ensure that all fixings are
tightened to the correct torque.
Nm
Anti-roll[sway] bar front
- Strap nyloc nuts
30
..............................................................................
- Ball link self lock nut
68
........................................................................
- Castellated nut
40
................................................................................
Drag link to axle
40
.........................................................................................
Securing ring for mounting turret
14
...............................................................
Radius arm to chassis
176
...............................................................................
Panhard rod mounting arm to chassis
88
.......................................................
Panhard rod to axle
88
....................................................................................
Panhard rod to mounting bracket
88
...............................................................
Tie bar to Panhard rod
110
..............................................................................
Radius arm to axle (front only)
197
..................................................................
Torque values below are for all screws and bolts used except for those that are specified otherwise.
METRIC
Nm
M5
6
...........................................................................
M6
9
...........................................................................
M8
25
...........................................................................
M10
45
.........................................................................
M12
90
.........................................................................
M14
105
.........................................................................
M16
180
.........................................................................
UNC / UNF
1/4
9
...........................................................................
5/16
24
.........................................................................
3/8
39
...........................................................................
7/16
78
.........................................................................
1/2
90
...........................................................................
5/8
136
...........................................................................
