300Tdi Discovery
SUPPLEMENTARY RESTRAINT SYSTEM
1
REPAIR
SYSTEM PRECAUTIONS
CAUTION: Before and during any removal
operations within the SRS section, note
routing and position of all harnesses to aid
correct refitting and to avoid accidentally trapping
cables.
CAUTION: During refitting of any item
within the SRS section, always ensure
connectors are fully engaged and latched
before proceeding to the next stage of the
operation.
DRIVER’S AIRBAG MODULE
Service repair no - 76.74.01
WARNING: All the airbag system
components, including the wiring harness,
MUST be renewed after the airbags have
deployed.
Remove
1. Turn steering wheel 90˚ from horizontal.
2. Switch off ignition.
3. Disconnect battery negative ’-’ and then the
positive ’+’ lead.
CAUTION: Always disconnect both leads.
4. Release 2 turnbuckles and remove dash lower
panel.
