300Tdi Discovery
CHASSIS AND BODY
43
REPAIR
SUN BLIND ASSEMBLY
Service repair no - 76.82.78
Remove
1. Open sunroof to the tilt position.
2. Remove the trim finisher from the sunroof
surround.
3. Release the headlining locally to access under
clamping frame of the sunroof.
4. Lever forward and upward the rear leg of 3
retaining clips to release sun blind roll assembly.
Refit
5. Ensure front leg of retaining clips are located.
6. Push in rear leg of retaining clip.
7. Reverse removal procedure.
CENTRE CONSOLE
Service repair no - 76.52.02
Remove
1. Disconnect battery earth lead.
2. Release tranfer gear lever gaiter from console.
3. Remove transfer gear lever gaiter and knob
assembly.
4. Release gear selector lever gaiter from centre
console.
5. Remove gear selector lever gaiter and knob
assembly.
6. Remove centre console rubber mat.