300Tdi Discovery
CHASSIS AND BODY
5
REPAIR
11. Withdraw the lock through the lower rear cut-out
on the inner door panel.
12. Remove the two nuts, shakeproof washers and
retaining bracket securing the outer door release
handle to the outer door panel, accessible
through the upper rear cut-out on the inner door
panel.
13. Carefully detach the door release handle from
the outer panel.
14. Remove the two screws securing the inside door
release handle to the inner panel.
15. Withdraw the handle from its location with the
connecting rod half still attached.
16. Unclip the end of the connecting rod from the
handle.
Refit
17. Reverse removal procedure.
