300Tdi Discovery
76
CHASSIS AND BODY
68
REPAIR
Dismantle
4. Remove interior lamp lens.
5. Remove 2 nuts securing lamp to stowage panel.
6. Remove lamp.
7. Remove alarm volumetric sensor/blanking plate.
8. Remove electric sun roof switch pack.
9. Remove electric sun roof manual opening plug.
Rebuild
10. Fit electric sun roof manual opening plug to
panel.
11. Fit alarm volumetric sensor.
12. Fit electric sun roof switch pack to panel.
13. Fit interior lamp to panel and secure with nuts.
14. Fit interior lamp lens.
Refit
15. Position stowage panel assembly and connect
Lucar and multiplugs.
16. Align panel to headlining and secure with
screws.
REAR FOLD DOWN SEAT BELTS - LH WITH REAR
AIR CONDITIONING FITTED
Service repair no - 76.73.28/20
Remove
1. Locate the seat in the down position, remove the
seat belt strap and buckle from their stowed
positions.
2. Remove seat belt strap and buckle retaining bolt
covers.
3. Remove bolts securing strap and buckle.
4. Remove seat belts and collect spacers.
Refit
5. Fit spacers to seat belt retaining bolts, position to
fixings and tighten to
32 Nm (24 lbf ft) .
6. Fit seat belt retaining bolt covers.
7. Secure seat belt strap and buckle to their stowed
positions and position seat in the up position.
