300Tdi Discovery - Repairing Front and Rear Electrical Sunroof Assembly
76
CHASSIS AND BODY
38
REPAIR
SUNROOF ASSEMBLY - ELECTRICAL, FRONT
AND REAR
Service repair no - 76.82.59
Remove
Refer to sunroof components illustration J5483
1. Ensure sunroof is in normally closed position.
2. Disconnect battery negative lead.
3. Remove headlining.
See headlining.
4. Disconnect electric motor wiring plug.
See
sunroof electric motors.
5. Remove screws and detach electric motor from
clamping frame.
6. Disconnect drain tubes from each side of
clamping frame.
7. Remove 13 fixings and remove clamping frame
from upper frame.
8. Remove upper frame assembly.
Refit
9. Position upper frame assembly into roof
aperture.
10. Locate clamping frame and reconnect drain
tubes.
11. Loosely fit screws, centralise upper frame and
clamping frame assemblies and then tighten
screws.
12. Reverse removal procedure.