300Tdi Discovery
HEATING AND VENTILATION
5
REPAIR
RECIRCULATION SWITCH
Service repair no - 80.10.27
Remove
1. Release fascia centre louvre vent panel from its
fitted position to gain access to rear of panel.
See CHASSIS AND BODY, Repair, Dash
Panel Central Louvre Panel
2. Disconnect multiplug from switch
3. From the rear, push switch out of panel.
Refit
4. Reverse removal procedure.
RECIRCULATION FLAP SOLENOID
Service repair no - 80.10.43
Remove
1. Open glove box, manoeuvre side springs
through cut-outs and lower lid.
2. Remove 2 locknuts securing cruise control ECU
to bracket.
3. Position cruise control ECU aside.
4. Remove 2 screws securing recirculation
solenoid to casing.
5. Release solenoid from lever.
6. Disconnect multiplug and remove solenoid.
Refit
7. Reverse removal procedure.