300Tdi Discovery
82
AIR CONDITIONING
6
REPAIR
CONDENSER
Service repair no - 82.15.07
Remove
1. Disconnect battery negative lead.
WARNING: Wear eye and hand protection
when disconnecting components
containing refrigerant. Plug all exposed
connections immediately.
2. Recover refrigerant from system.
See
Adjustment, Refrigerant Recovery Recycling
Recharging
3. Remove front grille panel.
4. Remove battery.
See ELECTRICAL, Repair,
Battery
5. Remove radiator and oil coolers assembly.
See
COOLING SYSTEM, Repair, Radiator
6. Disconnect high and low pressure pipes at
condenser unions.
7. Discard ’O’ ring seal from each union.
8. Remove 2 bolts securing condenser to body.
9. Pull condenser into radiator area.
10. Disconnect multiplug from each fan lead.
11. Remove condenser assembly.
Do not carry out
further dismantling if component is removed
for access only. Blank off inlet and outlet ports.