300Tdi Discovery
WIPERS AND WASHERS
1
REPAIR
WASHER RESERVOIR
Service repair no - 84.10.03.
Remove
1. Remove two bolts securing top of reservoir.
2. From underneath the wheelarch remove two
bolts securing base of reservoir.
3. Withdraw reservoir and disconnect tubing from
washer pumps and power wash.
4. Disconnect electrical leads from pumps.
Refit
5. Reverse removal procedure. 1 to 4.
WASHER PUMP - WINDSCREEN, REAR WINDOW
OR POWER WASH
Service repair no - 84.20.21.
Remove
1. Remove washer reservoir.
See Washer
reservoir
2. Disconnect washer tubing from pump.
3. Disconnect electrical leads from pump.
4. Pull top of pump away from its location in
reservoir and remove pump.
Note position of sealing gasket in reservoir.
Refit
5. Reverse removal procedure. 1 to 4.