300Tdi Discovery
86
ELECTRICAL
48
REPAIR
STARTER MOTOR HEAT SHIELD - 4.0 V8
Service repair no - 86.60.12
Remove
1. Disconnect battery negative lead.
2. Raise vehicle on ramp.
3. Remove heated oxygen sensor from RH exhaust
front pipe.
See EMISSION CONTROL, Repair,
Heated Oxygen Sensor (HO2S) - 4.0 V8
4. Remove bolt securing heat shield to RH engine
mounting bracket.
5. Release heat shield clip from starter solenoid.
6. Manoeuvre heat shield rearwards and around
starter motor.
Refit
7. Reverse removal procedure.
BULB - FRONT FOG LAMP
Service repair no - 86.40.94
Remove
1. Remove front fog lamp.
See fog lamp - front
2. Remove 2 Torx screws securing fog lamp to
bracket and collect 2 spacers.
3. Release fog lamp adjustment ball joint from
bracket and remove lamp.
4. Release lamp lens from shroud.
5. Disconnect 2 Lucars from bulb.
6. Release bulb retaining clip.
7. Remove bulb from lens.