300Tdi Discovery
ELECTRICAL
35
REPAIR
INSTRUMENT COWL AND ILLUMINATION BOARD
Service repair no - 88.20.06 - Instrument cowl
Service repair no - 88.20.22 - Illumination board
Remove
1. Remove binnacle,
See Instrument binnacle
Instrument cowl
2. Remove bulb holder from binnacle.
3. Release 4 clips securing top of cowl to binnacle.
4. Release 3 clips securing bottom of cowl to
binnacle, remove cowl.
Illumination board
5. Release bulb holder wires from clip.
6. Remove screw securing illumination board to
cowl, remove board.
Refit
Illumination board
7. Position illumination board to cowl, fit and tighten
screw.
8. Secure bulb holder wires in clip.
Instrument cowl
9. Ensure instrument face plate is correctly
positioned.
10. Position cowl to binnacle ensuring speedometer
trip passes through hole in cowl.
11. Secure cowl retaining clips.
12. Fit bulb holder in binnacle.
13. Fit binnacle.
See Instrument binnacle