300Tdi Discovery
ELECTRICAL
7
REPAIR
AUTOMATIC GEAR SELECTOR-PANEL BULB
Service repair no - 86.45.40
1. Disconnect battery negative lead.
2. Carefully prise quadrant finisher out of surround.
3. Carefully prise rear of surround away from
centre console.
4. Pull appropriate bulb holder from fitted position.
5. Remove bulb from holder.
Refit
6. Reverse removal procedure
START INHIBIT / REVERSE LIGHT SWITCH
Service repair no - 44.15.19
Automatic gearbox
Remove
Reverse light switch is an integral part of start inhibitor
switch. It is located on left hand side of gearbox,
accessible from beneath vehicle.
1. Place vehicle on suitable ramp [hoist].
2. Disconnect battery negative lead.
3. Disconnect multi-plug.
4. Release clamp bolt, remove clamp.
5. Remove switch.
Refit
6. Fit a NEW ’O’ ring to switch.
7. Reverse removal procedure.