300Tdi Discovery
ELECTRICAL
25
REPAIR
STARTER MOTOR - Mpi
Service repair no - 86.60.01
Remove
1. Disconnect battery negative lead.
2. Remove 2 nuts securing cables to starter
solenoid; release cables.
3. Remove 3 bolts securing starter motor.
4. Manoeuvre starter motor clear of bell housing.
5. Remove starter motor.
Refit
6. Clean mating faces of starter motor and
differential housing.
7. Manoeuvre starter motor into position.
8. Fit mounting bolts and Tighten to
45 Nm.
9. Connect battery cables to starter solenoid; fit
nuts and tighten to the correct torque.
10. Reconnect battery negative lead.