Discovery I (LJ) V8-3.9L (1994)
Trim Panel: Service and Repair
Trim Casing - Alpine Light
Trim Casing - Alpine Light
Remove
1. Remove RH 'E' post trim casing.
2. Remove rear seat belt anchorage retaining bolt cover.
3. Remove bolt securing rear seat belt anchorage.
4. Remove 2 trim studs securing trim casing.
5. Release trim casing from 2 retaining studs.
6. Remove trim casing.
Refit
7. Fit and align trim casing and secure with studs.
8. Fit 2 trim studs securing trim casing.
9. Position seat belt anchorage, fit bolt and tighten to 32 Nm.
10. Fit cover to seat belt anchorage bolt.
11. Fit 'E' post trim casing.