landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Brake Fluid Level Sensor/Switch > < Technician Safety Information|Page 9450
Page 1
background image

Brake Fluid: Service and Repair

NOTE:  Clean reservoir body and filler cap before removing cap. Use only fluid from a sealed container.

1. Park vehicle on level ground.
2. Check level is between MIN and MAX marks.
3. If level is below MIN mark top up fluid level to MAX mark on reservoir, using correct fluid. Do not fill reservoir above maximum line.

Brake Fluid Level Sensor/Switch > < Technician Safety Information|Page 9450