Discovery I (LJ) V8-3.9L (1994)
2)
Remove the harmonic damper rubber mounting and replace with ANR 2804. Due to a running change in stud size on the new rubber mounting it
may be necessary to drill both the harmonic damper weight and mounting support bracket to 12 mm diameter.
3)
Replace the right hand engine mounting (starter motor side) with ANR 2804.
NOTE:
It is easier to remove the engine mounting support bracket complete with rubber and refit as an assembly. Care must be taken when
raising/supporting the engine to ensure no cables or pipes are put under tension, pay particular attention to the clearance between the fan and radiator
cowl.
4)
Mark the harmonic damper with a white paint dot to signify modification has been made.
WARRANTY
Normal warranty policy and procedures apply
COMP. CODE
Engine mounting
5C1W
Harmonic damper
4N9W
SRO
12.45.03.80 - Replace front engine mount 00.30 hours
54.15.01.80 - Replace front axle harmonic mount 00.45 hours
54.15.01.88 - Drill damper weight/bracket and washers as necessary 00.20 hours