landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

A/T - Fluid Level Checking|Page 8138 > < A/T - Fluid Level Checking
Page 2
background image

5.

Remove the transmission dipstick and wipe clean.

6.

Insert the clean dipstick into the gearbox and ensure that it is pushed in completely.

CAUTION:

If the engine is HOT the MAXIMUM oil level is at 19mm (0.750 in.) above the upper maximum cold indicator hole/marking in the dipstick.
This location indicates the MAXIMUM HOT transmission oil level.

7.

Remove the dipstick immediately and observe the fluid level (Figure 1).

^

If the engine is HOT, fill transmission fluid to a level 19mm (0.750 in.) above the MAXIMUM cold marking.

^

If the engine is COLD, fill transmission fluid to the MAXIMUM cold marking.

A/T - Fluid Level Checking|Page 8138 > < A/T - Fluid Level Checking