Discovery I (LJ) V8-3.9L (1994)
WARRANTY
Normal warranty policy and procedures apply
COMP. CODE N
*SRO
Discovery:
64.15.23
Time 1.65 hrs. both sides
Replace rear stub axle seals
Defender 90:
64.15.23
Time 1.50 hrs. both sides
Replace rear stub axle seals*
REMOVE REAR AXLE SEAL
1.
Place rear axle onto axle stands and remove road wheel.
2.
Remove brake hose clips and remove brake caliper bolts. Secure caliper to one side.
NOTE:
Take care to support caliper so that brake hose is not stressed or kinked.
3.
Remove five bolts and remove axle shaft.
4.
Remove and discard gasket.
5.
Bend back lock washer tabs.
6.
Remove lock nut and lock washer.
7.
Remove hub adjusting nut.
8.
Remove spacing washer.
9.
Remove hub and brake disc assembly complete with bearings.