Discovery I (LJ) V8-3.9L (1994)
See Illustration
Repair Procedures
Rear Interior Light And Left Rear Quarter Panel
1.
Remove rear interior light. Refer to Electrical (Section 86) of the Workshop Manual.
2.
Locate redundant A/C harness connectors in the headliner (figure 1).
3.
Foam wrap the connectors and tape together any excess wiring (figure 1).
4.
Locate the interior light connector and foam wrap connector block as shown in figure 1.
5 Reinstall the interior light.
6.
Remove LH rear lamp access cover to gain access to the A/C connector block. The connector block is located behind the LH rear lamp assembly.
Refer to Electrical (Section 86) of the workshop manual.
7.
Locate the redundant A/C connectors. Foam wrap the connectors and tape up any excess wiring (figure 2).
8.
Reinstall trim panel.
"A" Post Rattle