Discovery I (LJ) V8-3.9L (1994)
Front Door Window Glass: Service and Repair
Front Door Glass and Regulator
Service Repair No - 76.31.45
Remove
1. Ensure the window is in the fully closed position and secure with adhesive tape to prevent the window from dropping down.
2. Disconnect battery negative lead.
3. Remove the door trim panel.
4. Remove the plastic vapor barrier.
5. Where applicable remove the window lift motor.
6. Remove the four window regulator retaining screws and shakeproof washers from the inner door panel.
7. Remove the two screws and shakeproof washers retaining the lower window lift channel, and slide the channel off the stud.
8. Disengage the lifting arm stud from the upper lifting channel, maneuver the window regulator and remove it from the lower center opening in the
inner door panel.
9. Remove the exterior driving mirror.