Discovery I (LJ) V8-4.0L (1996)
Lock Cylinder Switch: Service and Repair
Remove
1. Remove Steering Column Shroud.
2. Release multiplug from harness clip and disconnect.
3. Release passive coil from starter switch.
4. Remove bulb holder/starter switch shroud.
5. Remove coil.
Refit
6. Fit coil, ensuring switch illumination bulb harness passes through large cut-out.
7. Secure coil with cable tie.
8. Position bulb holder/starter switch shroud and locate bulb.
9. Locate bulb holder/starter switch shroud, ensuring cut-out in shroud aligns with lug on starter switch.
10. Connect multiplug and secure to clip.
11. Fit column shroud.