Discovery I (LJ) V8-4.0L (1996)
Front Door Window Motor: Service and Repair
Window Lift Motor - Front
Service Repair No - 86.25.04
Remove
1. Ensure that the window glass is in its fully closed position and secure it with adhesive tape.
2. Disconnect battery negative lead.
3. Remove the door pull, trim panel, and plastic vapor barrier.
4. Release the window lift motor wiring harness from the three retaining clips to allow the harness to be pulled out of the opening at the front of the
inner door panel.
5. Disconnect the window lift motor harness multi-plug from the main door harness.
6. Support the motor, remove the three securing bolts and withdraw the motor through the top front opening of the door panel.
Refit
7. Reverse removal procedure.
NOTE: Ensure drive gear is engaged and correctly aligned with window lift linkage before fitting securing bolts.