Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-2374001.png)
Trunk / Liftgate Latch: Service and Repair
Remove
1. Disconnect battery negative lead,
2. Remove the door pull, trim panel and vapor protective sheet from the inner door panel.
3. Disconnect the actuator leads from the door electrical harness.
4. Remove the two screws securing the actuator door panel.
5. Manoeuvre the actuator, disconnect the rod from the link and withdraw the actuator from the door.
Refit
6. Reverse removal procedure.
