Discovery I (LJ) V8-4.0L (1996)
/v8-4.0l/Page-2421002.png)
7.
Operate the lock using the remote and check that the height of the sill button closely matches the marks made on the link rod in steps 4 and 5.
8.
If you are unable to obtain full adjustment by moving the actuator assembly, change the actuator and follow the process from step 3.
9.
Test the operation of the door.
10.
Install the door trim after confirming the lock is working correctly
WARRANTY
Normal warranty procedures and policies apply.
COMP. CODE
SRO
86.26.89127 - Time 0.50 hrs (each side) Adjust locking actuator
86.26.08 - Time 0.75 hrs Replace LH actuator
86.26.08/03 - Time 0.75 hrs Replace RH actuator
