Discovery I (LJ) V8-4.0L (1996)
Coolant Reservoir: Service and Repair
Expansion Tank
Service Repair No - 26.15.01
WARNING: Do not remove expansion tank filler cap when engine is hot. The cooling system is pressurized and personal scalding could result.
Remove
1. Remove expansion tank filler cap by first turning it slowly anti-clockwise, pause to allow pressure to escape. Continue turning in same direction
and lift off.
2. Disconnect two hoses from bottom of expansion tank, allowing coolant to drain into a suitable container.
3. Remove three bolts, remove expansion tank.
Expansion Tank
Refit
1. Reverse removal instructions.
2. Replenish cooling system.
3. Check for leaks around all hose connections.